diff --git a/include/configs/odroid.h b/include/configs/odroid.h
new file mode 100644
index 0000000..29dcc4a
--- /dev/null
+++ b/include/configs/odroid.h
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Sanghee Kim <sh0130.kim@samsung.com>
+ * Piotr Wilczek <p.wilczek@samsung.com>
+ * Przemyslaw Marczak <p.marczak@samsung.com>
+ *
+ * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ODROID_U3_H
+#define __CONFIG_ODROID_U3_H
+
+#include <configs/exynos4-dt.h>
+
+#define CONFIG_SYS_PROMPT	"Odroid # "	/* Monitor Command Prompt */
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE	exynos4412-odroid
+
+#define CONFIG_SYS_L2CACHE_OFF
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#define CONFIG_SYS_L2_PL310
+#define CONFIG_SYS_PL310_BASE	0x10502000
+#endif
+
+#define CONFIG_MACH_TYPE	4289
+
+#define CONFIG_NR_DRAM_BANKS	8
+#define CONFIG_SYS_SDRAM_BASE	0x40000000
+#define SDRAM_BANK_SIZE		(256 << 20)	/* 256 MB */
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+#define CONFIG_SYS_TEXT_BASE		0x43e00000
+
+#include <linux/sizes.h>
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL1
+#define CONFIG_BAUDRATE			115200
+
+/* Console configuration */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE
+#define CONFIG_BOOTARGS			"Please use defined boot"
+#define CONFIG_BOOTCOMMAND		"run autoboot"
+#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
+					- GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_MEM_TOP_HIDE	(SZ_1M)	/* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		(SZ_1K * 1280) /* 1.25 MiB offset */
+#define CONFIG_ENV_OVERWRITE
+
+/* Partitions name */
+#define PARTS_BOOT		"boot"
+#define PARTS_ROOT		"platform"
+
+#define CONFIG_DFU_ALT \
+	"uImage fat 0 1;" \
+	"zImage fat 0 1;" \
+	"Image.itb fat 0 1;" \
+	"uInitrd fat 0 1;" \
+	"exynos4412-odroidu3.dtb fat 0 1;" \
+	"exynos4412-odroidx2.dtb fat 0 1;" \
+	""PARTS_BOOT" part 0 1;" \
+	""PARTS_ROOT" part 0 2\0" \
+
+#define CONFIG_SET_DFU_ALT_INFO
+#define CONFIG_SET_DFU_ALT_BUF_LEN	(SZ_1K)
+
+#define CONFIG_DFU_ALT_BOOT_EMMC \
+	"u-boot raw 0x3e 0x800 mmcpart 1;" \
+	"bl1 raw 0x0 0x1e mmcpart 1;" \
+	"bl2 raw 0x1e 0x1d mmcpart 1;" \
+	"tzsw raw 0x83e 0x138 mmcpart 1\0"
+
+#define CONFIG_DFU_ALT_BOOT_SD \
+	"u-boot raw 0x3f 0x800;" \
+	"bl1 raw 0x1 0x1e;" \
+	"bl2 raw 0x1f 0x1d;" \
+	"tzsw raw 0x83f 0x138\0"
+
+/*
+ * Bootable media layout:
+ * dev:    SD   eMMC(part boot)
+ * BL1      1    0
+ * BL2     31   30
+ * UBOOT   63   62
+ * TZSW  2111 2110
+ * ENV   2560 2560(part user)
+ *
+ * MBR Primary partiions:
+ * Num Name   Size  Offset
+ * 1.  BOOT:  100MiB 2MiB
+ * 2.  ROOT:  -
+*/
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadkernel=fatload mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
+		"${kernelname}\0" \
+	"loadinitrd=fatload mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
+		"${initrdname}\0" \
+	"loaddtb=fatload mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
+		"${fdtfile}\0" \
+	"check_ramdisk=" \
+		"if run loadinitrd; then " \
+			"setenv initrd_addr ${initrdaddr};" \
+		"else " \
+			"setenv initrd_addr -;" \
+		"fi;\0" \
+	"check_dtb=" \
+		"if run loaddtb; then " \
+			"setenv fdt_addr ${fdtaddr};" \
+		"else " \
+			"setenv fdt_addr;" \
+		"fi;\0" \
+	"kernel_args=" \
+		"setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \
+		" rootwait ${console} ${opts}\0" \
+	"boot_fit=" \
+		"setenv kerneladdr 0x42000000;" \
+		"setenv kernelname Image.itb;" \
+		"run loadkernel;" \
+		"run kernel_args;" \
+		"bootm ${kerneladdr}#${boardname}\0" \
+	"boot_uimg=" \
+		"setenv kerneladdr 0x40007FC0;" \
+		"setenv kernelname uImage;" \
+		"run check_dtb;" \
+		"run check_ramdisk;" \
+		"run loadkernel;" \
+		"run kernel_args;" \
+		"bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+	"boot_zimg=" \
+		"setenv kerneladdr 0x40007FC0;" \
+		"setenv kernelname zImage;" \
+		"run check_dtb;" \
+		"run check_ramdisk;" \
+		"run loadkernel;" \
+		"run kernel_args;" \
+		"bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+	"autoboot=" \
+		"if test -e mmc 0 Image.itb; then; " \
+			"run boot_fit;" \
+		"elif test -e mmc 0 zImage; then; " \
+			"run boot_zimg;" \
+		"elif test -e mmc 0 uImage; then; " \
+			"run boot_uimg;" \
+		"fi;\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"mmcbootdev=0\0" \
+	"mmcbootpart=1\0" \
+	"mmcrootdev=0\0" \
+	"mmcrootpart=2\0" \
+	"bootdelay=0\0" \
+	"dfu_alt_system="CONFIG_DFU_ALT \
+	"dfu_alt_info=Please reset the board\0" \
+	"consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
+	"consoleoff=set console console=ram; save; reset\0" \
+	"initrdname=uInitrd\0" \
+	"initrdaddr=42000000\0" \
+	"fdtaddr=40800000\0"
+
+/* I2C */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
+#define CONFIG_MAX_I2C_NUM		8
+#define CONFIG_SYS_I2C_INIT_BOARD
+
+/* POWER */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
+
+/* GPT */
+#define CONFIG_RANDOM_UUID
+
+/* Security subsystem - enable hw_rand() */
+#define CONFIG_EXYNOS_ACE_SHA
+#define CONFIG_LIB_HW_RAND
+
+#define CONFIG_CMD_GPIO
+
+/*
+ * Supported Odroid boards: X3, U3
+ * TODO: Add Odroid X support
+ */
+#define CONFIG_MISC_COMMON
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_BOARD_TYPES
+#define CONFIG_MISC_INIT_R
+
+#undef CONFIG_REVISION_TAG
+
+#endif	/* __CONFIG_H */